Alpha Microsystems AM-647 Especificaciones descargar pdf (Pagina 13)

Page 8 Installation Instructions: Roadrunner 030 & 040 AM-1000 / AM-1200 Upgrade

revision -04:08 or later. You can use the SCSI.LIT program (included in AMOS

2.2C and 1.4C operating system releases) to determine the firmware revision of

your tape drive. Simply type in the command SCSI at the AMOS prompt and the

program will display a string of numbers which includes the firmware revision.

To install the firmware PROM, you simply remove the two TORX screws holding

the drive’s top cover in place; lift off the top cover; gently pry out the old PROM;

and install the new PROM, as shown.

FIRMWARE PROM

LOCATION

Make sure the notch

in the chip (indicating

pin-1) points toward

the rear of the drive.

TORX SCREWS

MAC860

AM-626 PROM Installation

3.AM-627 and AM-628 Tandberg SCSI tape drives also require a firmware update

to be SCSI-2 compatible. However, these drives use a flash ROM for their

firmware, which can be updated without removing the drive from the computer.

PDI-00172-10, Rev. A03

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 65 66

Sin comentarios

Alpha Microsystems AM-647 Especificaciones Pagina 13