Alpha Microsystems AM-647 Especificaciones Pagina 9

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 66
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 8
Page 4 Installation Instructions: Roadrunner 030 & 040 AM-1000 / AM-1200 Upgrade
2.2Environmental Specifications
Computer operating
temperature external
60 to 80 degrees F (16 to 27
degrees C)
Humidity 10% to 90% (non-condensing)
2.3Power Specifications
DC power requirements (maximum):
Board Current Draw
AM-172 1.6 A
AM-174 2.9 A
AM-985 200 ma
3.0MECHANICAL REQUIREMENTS
The Roadrunner product kit included with this document is mechanically compatible with
both AM-167 based AM-1000 and AM-177 based AM-1200 computers. However, there
are some minimum revision requirements for both AM-167 and AM-177 boards that
must be met in order to be Roadrunner compatible. The minimum acceptable revision
levels for AM-167 and AM-177 boards (along with the minimum acceptable revision
levels for other AM-1000 and AM-1200 related hardware) are documented in the next
section.
Some AM-1000 and all AM-1200 computers contain a 68000 or 68010 CPU chip which
is soldered to the main electronics board. If this is the case with your computer, you
must make arrangements to have the CPU chip un-soldered from the board. Also, a
64-pin socket (included in the product installation kit), compatible with the AM-985
board, must be soldered in the location where the CPU chip was removed. The process
of removing the CPU chip and installing the 64-pin socket is a delicate procedure, which
if done incorrectly could result in a damaged AM-167 or AM-177 board. This procedure
should only be done by an authorized service technician.
Some AM-167 or AM-177 boards may have an old style side-contact 64-pin socket.
When installed in this type of socket, you will notice the AM-985 board will easily move
from side to side, even though it is seated into the socket. If you encounter this situation,
have your old 64-pin socket removed and install one of the full-contact 64-pin sockets
included with the Roadrunner hardware kit.
PDI-00172-10, Rev. A03
Vista de pagina 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 65 66

Comentarios a estos manuales

Sin comentarios